How to Connect Kwikset Halo to Wi-Fi?

What would you expect from a smart lock for your home? For me, it’s a one-time payment, ease of use, Wi-Fi connection support, and durability. I have experienced multiple makes and models of smart locks but settled down with Kwikset Halo. Want to know why?

Well, most of the smart locks either require you to subscribe to their cloud access or connect a hub to receive notifications, or simply have a complicated locking and unlocking process. However, with the Kwikset Halo lock, this is not the case. It supports Wi-Fi (without the hassle of connecting a hub), does not require a subscription, and is easy to set up and operate. 

After purchasing it, I spent just a few minutes setting it up; however, based on the frequently asked questions, I observed that users are still looking for solutions on How to Connect Kwikset Halo to Wi-Fi. Therefore, I decided to create this guide on How to Connect Kwikset Halo to Wi-Fi. This guide will cover a detailed process of setting up the Wi-Fi connection, a troubleshooting guide, and more. 

How to Connect Kwikset Halo to Wi-Fi?

To Connect Kwikset Halo to Wi-Fi, follow these steps:

Step 1: Download the Kwikset app 

Download the Kwikset app from the App Store (for iOS devices) or Google Play Store (for Android devices). 

Step 2: Create an account 

After installing the app, create an account if you haven’t already done so. Once logged in, follow the prompts to enter your desired email and password to complete the process.

Step 3: Add Kwikset Halo to the App

After you log in, the next step is to ensure that Kwikset Halo is turned on and is connected to Wi-Fi so that you add it to the App. Next, you must tap on the top right corner to add a new home device aka your Kwikset Halo smart lock. Tap on the app as it appears in the available devices list to finish connecting. 

Step 4: Connect Kwikset Halo to Wi-Fi

After connecting the Kwikset Halo lock to your mobile app, give it a discreet name to identify it in case you have multiple locks. Afterward, head to Settings -> Networks-> Add Wi-Fi Network and select the Wi-Fi network you want to connect. After entering the password, your Kwikset Halo will get connected to Wi-Fi.

After following Step 4, you can test the connection by locking and unlocking your Kwikset Halo using the app while connected to Wi-Fi. Observe that the lock responds to commands and that you receive notifications if applicable.

Kwikset Halo Not Connecting to Wi-Fi?

In rare cases, the Kwikset Halo may fail to connect to Wi-Fi. In that case, you can follow this troubleshooting guide to identify the problem and rectify it. Here are the steps:

Step 1: Check Wi-Fi Settings

Ensure your Wi-Fi credentials are correct and match your router’s settings.

Step 2: Reset Devices

Try resetting both the Kwikset Halo and your router, ensuring they’re updated with the latest firmware.

Step 3: Reduce Interference

Keep devices away from each other to avoid interference, especially if they’re on the same frequency.

Step 4: Adjust Placement

Move the Kwikset Halo closer to the router, removing any obstructions blocking the Wi-Fi signal.

Step 5: Update Firmware and App

Check for updates for both the Kwikset Halo and the app, and install them if available.

Step 6: Manage Network Congestion

Disconnect some devices or switch to a less congested Wi-Fi channel.

Step 7: Network Reset 

If your Wi-Fi credentials change, perform a Network Reset to connect the lock to the new network.

Step 8: Restart Router and Modem

Power cycle your router and modem by turning them off and on.

Step 9: Improve Coverage

Ensure sufficient Wi-Fi coverage; consider using a Wi-Fi extender if necessary.

Keep in mind that various factors can affect Wi-Fi performance. If these steps don’t help, reach out to Kwikset’s customer support for further assistance. 

How to Reset Kwikset Wi-Fi Lock?

In case your Wi-Fi network has changed, or you are facing any issues with Wi-Fi on your Kwikset Halo lock, then the easiest way to get away with this situation is by resetting the Wi-Fi on the lock. Here are the steps:

Step 1: Locate the Reset Button

On the back panel of the interior assembly of your Kwikset Halo smart lock, find the small button labeled “A.” This button is typically recessed and may require a tool like a paperclip to press.

Step 2: Perform the Factory Reset

Press and hold the “A” button for approximately 10 seconds until you hear a beep sound and see the lock’s status LED blinking red. This indicates that the factory reset process has started.

Step 3: Wait for the Reset Process

Allow the lock a minute or two to complete the factory reset process. During this time, it will restore its original factory settings.

Step 4: Restart the Setup

Once the factory reset is complete, you’ll need to set up your Kwikset Halo again with your Wi-Fi network. Proceed to follow the initial setup instructions provided with your lock.

Step 5: Add the Device to the App

Open the Kwikset app on your smartphone or tablet and add a new device. Follow the guide above to connect Kwikset Halo to your Wi-Fi network.

Step 6 (optional): Test the Connection

After completing the setup, test the connection by locking and unlocking the door using the app while connected to Wi-Fi. This ensures that the reset process is successful and that your lock is properly connected to your network.

Conclusion

This brings me to the end of this comprehensive guide on How to Connect Kwikset Halo to Wi-Fi. Whether it is initial Wi-Fi connection setup or resetting it, the guide covers all aspects. If you faced any other technical issue during the connection process, I advise you to drop a comment below and I will take it from there. 

Frequently Asked Questions